E/Z Prime 952™

[tab name=Description]

 

E/Z Prime 952™ is a water-soluble polymer that is especially well suited for promoting adhesion of polyethylene and polypropylene resins to various other supporting films and papers used in extrusion coating, laminating and printing. E/Z Prime 952™ also has served as a preprint primer and for dry-bond laminating.

*The information listed here is intended to assist in determining the suitability of our products.  We recommend that our products be tested to determine successful performance for the intended purpose. 

 

[/tab]

[tab name=Features]

  • USDA and FDA components approved for packaging
  • High bond levels
  • Used as supplied—no diluting necessary
  • Stable; 9-month shelf life if kept tightly closed
  • Ease of drying
  • Spills clean up with water
  • Non-hazardous to workers and environment
  • Fully recoverable if frozen

[/tab]

[tab name=Materials]

  • PE, LDPE, HDPE
  • Polyester
  • PVDC, OPP, EVA
  • Nylon

[/tab]

[tab name=ApplicationConditions]

In general, application conditions should correspond to the following:

Room Temperature 50° F and up
Solution Temperature 35° F to 160° F
ApplicationMethod Direct Gravure, or Flexo with very fine line and up
Accepting Film Corona treated recommended
Extrudate Condition  Should be oxidized while coating

[/tab]

[tab name=TypicalProperties]

Appearance ………………………………… Cloudy Off-white solution
Solids ………………………………… 5% or customer specified
Density ………………………………… 1.007
Viscosity ………………………………… 5-15 cps
Weight/Gallon ………………………………… 8.39 lbs.
pH ………………………………… 10.8-11.5

[/tab]

[tab name=PackagingApplications]

The range of packaging applications using E/Z Prime 952™ as a primary laminate adhesive is expanded by the fact that it can be used, under USDA approval, for indirect food contact, and has approval for other packaging controlled by FDA regulation 21 CFR part 175.105 which governs substances used only as adhesives components in food packaging, 21 CFR part 176.170 governing substances used as a component of paper and paperboard in contact with aqueous or fatty foods.

[/tab]

[tab name=Labeling]

E/Z Prime 952™ is not classified as a hazardous substance under DOT or OSHA regulations or as a controlled product under WHIMS (Canada regulations). It does not contain any hazardous components at levels which have implications for labeling.

Elm Grove Industries, LLC is a global supplier of specialty chemical products for the plastics and packaging industries.

The information contained herein is intended to assist you in determining the suitability of our product for your commercial or industrial applications. As performance characteristics vary according to application, operating conditions, use, etc., we recommend that you test our products to determine to your satisfaction that quality and performance are suitable for your particular purpose. Nothing herein shall constitute a warranty of any kind, express or implied, including but not limited to warranty of merchantability or fitness, nor is protection from any patent to be inferred.
[/tab]

[tab name=MSDS]

E/Z Prime 952™ MSDS

[/tab]

[end_tabset]