E/Z Machine and Roller Cleaner

[tab name=Description]

E/Z Machine and Roller Cleaner is a water-based, non-petroleum based high-performance cleaning compound, designed to remove polymer residues on anilox and smooth rollers, as well as spills on machinery or floors.  It also works well in removing water-based inks from polymer, rubber and steel plates with little effort. It will not dry out photopolymer printing plates.

E/Z Machine and Roller Cleaner is an environmentally friendly product.  It is non-flammable, biodegradable and contains no phosphates.  Since it is alkaline in nature, it should not be used to clean alkali-sensitive materials such as aluminum.

*The information listed here is intended to assist in determining the suitability of our products.  We recommend that our products be tested to determine successful performance for the intended purpose.
[/tab]

[tab name=Typical Properties]

Boiling point ………………………………… 212° F / 100° C
Special Gravity ………………………………… 1.044
Vapor Pressure ………………………………… < 30 mm Hg
Solubility in Water ………………………………… Infinite
Appearance ………………………………… Water-white; clear solution
Flash Point ………………………………… N/A
pH ………………………………… 12.5 – 13.0
[/tab]

[tab name=UsageInstructions]

General Use

Apply to area to be cleaned and let stand for 15-30 seconds, depending on amount of ink or polymer present.  Wipe off and repeat if necessary.

For Rollers

Apply liberal amount to entire roller surface when cleaning.  Rollers can either be running or not.  Best procedure is to allow rollers to run so that ink will dissipate or polymer will dissolve.  Repeat if necessary.

For Printing Plates

Apply to printing plates using a rag or brush, rub gently across image area and remove with dry cloth.  Repeat if necessary.

[/tab]

[tab name=Labeling]

E/Z Machine and Roller Cleaner contains 5.2% by weight of a component (Ethylene Glycol Monobutyl Ether) which is considered hazardous and is subject to the reporting requirements of Section 313 of Tittle III of SARA 1986 and 40 CFR Part 372.

Elm Grove Industries, LLC is a global supplier of specialty chemical products for the plastics and packaging industries.

The information contained herein is intended to assist you in determining the suitability of our product for your commercial or industrial applications. As performance characteristics vary according to application, operating conditions, use, etc., we recommend that you test our products to determine to your satisfaction that quality and performance are suitable for your particular purpose. Nothing herein shall constitute a warranty of any kind, express or implied, including but not limited to warranty of merchantability or fitness, nor is protection from any patent to be inferred.

[/tab]

[tab name=MSDS]

E/Z Machine and Roller Cleaner MSDS

[/tab]

[end_tabset]