E/Z PurgeŽ - Super
Material Safety Data
Sheet
Click
here for the Printable MSDS
APPLICATION
Concentrated Purging compound for the Polymer Industry
PRODUCT DESCRIPTION
Chalky tan liquid
HEALTH INFORMATION & FIRST AID TREATMENT
FIRST AID: -
EYE CONTACT: Flush with water
SKIN CONTACT: Wash with water
INHALATION: Non hazardous, remove to fresh air
INGESTION: Give two glasses of water. Do NOT induce
vomiting. Obtain medical advice.
HEALTH
HAZARDS – TOXICOLOGY:-
EYE
CONTACT: Negligible hazard
SKIN CONTACT: Non hazardous
INHALATION: Non hazardous
INGESTION: Negligible hazard
ISSUE:
1
PERSONAL PROTECTION
Use safety goggles to avoid splash
up
Wash hands after handling if rubber gloves are not worn
FIRE AND
EXPLOSION HAZARD DATA
Flash Point:
Too high to measure by normal methods
Explosive Limits: Non explosive
SPILL CONTROL PROCEDURE
Absorb on dry material and discard as normal waste. Wash to drain with
water.
PHYSICAL & CHEMICAL PROPERTIES
Chemical Name:
None (Material is a proprietary mixture)
Vapor Pressure: 16mm @ 21°C
Specific Gravity (Water = 1): 1.23
Boiling Point: 235° F/ 113°C
Evaporation Rate: Not applicable
Viscosity Of Liquid: 6,800 cps
Freezing/Melting Point: Not applicable
Solubility In Water: Infinite
Biodegradability: Highly biodegradable
REACTIVITY DATA
Stability: Stable
Conditions To Avoid Instability: Not applicable
Hazardous Polymerization: Will not occur
Conditions To Avoid Hazardous Polymerization: Not applicable
Materials & Conditions to Avoid Incompatibility:
Materials: None
Conditions: Protect from Freezing
Hazardous Decomposition
Products: None
TRANSPORTATION &
STORAGE
Usual Shipping Containers: Quart bottles
in cases, 5 gallon pails, 55 gallon drums
Storage Temperature: Ambient
Transport Temperature: Ambient
HAZARD CLASSIFICATION
Product is classified as non-hazardous for all modes of transportation
The information herein is given in good faith and to the
best of our knowledge. No warranty, express or implied, is made.
4/14/2008
|
