Water-Soluble Extrusion Primer and Lamination Adhesive

FIRST AID: -

EYE CONTACT:  Flush with water
SKIN CONTACT:  Wash with soap & water, may cause mild skin irritation
INHALATION:            Remove to fresh air
INGESTION:  Give two glasses of water.  Do NOT induce vomiting.  Obtain medical advice.

HEALTH HAZARDS – TOXICOLOGY:-

No chronic problems result from exposure 

PERSONAL PROTECTION

 Use safety glasses
Plastic or rubber gloves
No respiratory protection required 

FIRE AND EXPLOSION HAZARD DATA 

Flash Point:  N/A
Explosive Limits:  Non explosive

Flush material with water to drain or sewer

PHYSICAL & CHEMICAL PROPERTIES

 Chemical Name:        None (Material is a proprietary mixture)
Density:          1.003
Specific Gravity (Water = 1):  1.007
Boiling Point:    212° F/ 100°C
Evaporation Rate:     Same as water
Viscosity Of Liquid:  5-15 cps
Freezing/Melting Point:  Freezes at 32° F/ 0°C
pH:      10.5-11.0
Solids:   5% 

REACTIVITY DATA

 Stability:  Stable
Incompatibility: may react with oxidizing materials
Hazardous Decomposition or Byproducts: Nitrogen Oxides & Carbon Monoxide
Conditions:  Protect from Freezing 

Usual Shipping Containers:  55 gallon drums or 300 gallon totes
Storage Temperature: 40°F/10°C to 85°F/38°C
Transport Temperature: must be above freezing – fully recoverable if frozen