E/Z Prime - 950™
Material Safety Data
Sheet
Click here for the
Printable MSDS
APPLICATION
Water-Soluble Extrusion
Primer and Lamination Adhesive
PRODUCT DESCRIPTION
Clear
liquid solution
CHEMTREC:
1-800-424-9300
Manufacturer Telephone Number: 1-800-494-2520
HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
This product is a proprietary mixture that does not have
any ingredients that are hazardous under current U.S. Department of Labor
definitions.
HEALTH INFORMATION & FIRST AID TREATMENT
FIRST AID: -
EYE CONTACT: Flush with water
SKIN CONTACT: Wash with soap & water, may cause mild skin
irritation
INHALATION:
Remove to fresh air
INGESTION: Give two glasses of water. Do NOT induce
vomiting. Obtain medical advice.
HEALTH HAZARDS – TOXICOLOGY:-
No chronic problems
result from exposure
PERSONAL PROTECTION
Use safety glasses
Plastic or rubber gloves
No respiratory protection required
FIRE AND EXPLOSION HAZARD DATA
Flash Point:
N/A
Explosive Limits: Non explosive
SPILL CONTROL PROCEDURE
Flush material with water to drain or sewer
PHYSICAL & CHEMICAL PROPERTIES
Chemical Name:
None (Material is a proprietary mixture)
Density: 1.003
Specific Gravity (Water = 1): 1.007
Boiling Point: 212° F/ 100°C
Evaporation Rate: Same as water
Viscosity Of Liquid: 5-15 cps
Freezing/Melting Point: Freezes at 32° F/ 0°C
pH: 10.5-11.0
Solids: 2%
REACTIVITY DATA
Stability: Stable
Incompatibility: may react with oxidizing materials
Hazardous Decomposition or Byproducts: Nitrogen Oxides & Carbon Monoxide
Conditions: Protect from Freezing
TRANSPORTATION &
STORAGE
Usual Shipping Containers: 55 gallon drums or
300 gallon totes
Storage Temperature: 40°F/10°C to 85°F/38°C
Transport Temperature: must be above freezing – fully recoverable if frozen
The
information herein is given in good faith and to the best of our knowledge.
No warranty, express or implied, is made.
4/14/2008
|
